Print Page | Close Window

Peripheral Neutral Safety Switch Bypass

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=17369
Printed Date: July 13, 2025 at 9:29 AM


Topic: Peripheral Neutral Safety Switch Bypass

Posted By: Mugen1516
Subject: Peripheral Neutral Safety Switch Bypass
Date Posted: August 08, 2003 at 10:03 PM

Anyone have experience with this? I just order the Hornet 554T and I'm not going to do the remote start the first time around I don't think until I learn more about this. Here's a link to its manual: https://peripheralelectronics.com/periph_products/cd_changer_autos/instructions/Peripheral%20-%20NSS.pdf

Now, I have some questions about it if anyone knows. It has an orange wire that goes to an "interior radar trigger wire". Does that just mean dome light? Also, it has door pin switch wires (+) and (-). Where do these go?

Car: 1993 Honda Prelude VTEC




Replies:

Posted By: Mugen1516
Date Posted: August 09, 2003 at 5:37 AM

If it means the factory door pins, how do I wire up the 2 wires to both door pins?





Posted By: cool_greg
Date Posted: August 09, 2003 at 9:14 AM
interior radar means if you have a motion sensor, that's the trigger wire for it.

door pin switches, you need to figure out what kind your car has + or - switched and use the appropate one

-------------
Just a Guy, Wiring up those Vehicals
---------------------------------
Gool_Greg






Print Page | Close Window