pins on a CF Hood?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=17385
Printed Date: April 28, 2024 at 10:24 AM

Topic: pins on a CF Hood?

Posted By: bluersx510
Subject: pins on a CF Hood?
Date Posted: August 09, 2003 at 4:08 AM

I'd like to put pins/switch on my CF hood (ground) so if the hood is popped, the wire goes off.. anyone do this on a CF Hood successfully?

Replies:

Posted By: NowYaKnow
Date Posted: August 09, 2003 at 8:39 AM

You can just use any standard hood pin switch that comes with pretty much every alarm around. (With the exception of some that come with tilt switches, damn fords..) Doesn't make any difference what the hood is made out of as long as the switch itself is mounted to metal. Just put a fiberglass hood on my car and plan to put a hood pin in won't be any different than putting one on a car with a cf hood, steel hood, etc..One thing you might want to do is try to get the pin to sit on one of the supports on the underside of the cf hood rather than just on a flat spot of the hood. Good luck

Posted By: Himself
Date Posted: August 09, 2003 at 9:57 AM

I have run into this a couple times where I work. That hood just wasnt heavy enough to push the pin in all the way. What I use is a DEI magnetic switch, its P/N 8600, and I mount it in the front of the hood. They have worked great for me. Just a thought for you..

-------------
What?