Help 1991 Mazda Navajo

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=17415
Printed Date: May 03, 2025 at 6:48 AM

Topic: Help 1991 Mazda Navajo

Posted By: Black Lightning
Subject: Help 1991 Mazda Navajo
Date Posted: August 10, 2003 at 12:33 PM

Hi I have a 1991 Mazda Navajo and am trying to install a remote start but the info that I got off of here says there is a 1 starter output wire and it is pink but I have 2 what one do I go to I tryed one but it did not start??? please help

Replies:

Posted By: Velocity Motors
Date Posted: August 10, 2003 at 12:41 PM

Use your DMM to test for this wire. If the DMM register's voltage when you start on this wire, you have the right one.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: Black Lightning
Date Posted: August 10, 2003 at 4:02 PM

I did that and they both have voltage when I Start it and they both are pink. I tryed both fo them with no luck I got it to the point were if I try to start it every thing goes as it should but it will not start please help

Posted By: Velocity Motors
Date Posted: August 10, 2003 at 4:05 PM

My notes tell me that you only need one, but if both are needed for startinf, you will need a relay to engage the second starter wire. Use this diagram: https://www.velocitymotorsport.com/images/install_notes/108.jpg

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: Black Lightning
Date Posted: August 10, 2003 at 7:27 PM

there is 3 wires look at the install manual here but what you are saying is not to put these wires together like this posted_image

Posted By: Black Lightning
Date Posted: August 12, 2003 at 10:09 AM

ttt

Print Page | Close Window