Print Page | Close Window

adding a remote alarm to remote central locking

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=1753
Printed Date: July 19, 2025 at 4:02 AM


Topic: adding a remote alarm to remote central locking

Posted By: fredisfound
Subject: adding a remote alarm to remote central locking
Date Posted: July 07, 2002 at 5:08 AM

I have to install a remote alarm to a Holden Commodore 1994 model, ( you dont get them over there yet) (You will get the 2003 model rebadged as a Pontiac GTO.But other cars must be similar. I need to know how to link the original remote locking control to the new alarm remote, so there is only one controller.Either the original or the alarm control remote. Any information would be greatly appriciated. Thanx




Replies:

Posted By: Velocity Motors
Date Posted: July 07, 2002 at 9:00 AM

Use the alarm control module's remote control because you will get better range ). All you need to do is to piggyback the OEM wiring and then you can use the aftermarket system as well as the oEM one as a back up if need be.



-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA





Print Page | Close Window