2 start wires
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=17594
Printed Date: May 15, 2025 at 5:15 AM
Topic: 2 start wires
Posted By: almeida79
Subject: 2 start wires
Date Posted: August 14, 2003 at 5:20 PM
I've installed several remote starts on some nissan vehicles and a camry with two starter wire I've always connected them together with each other except when the remote starter has a dedicated 2nd starter output like the compustar 2000as does am i doing anything bad by conecting the 2 crank wires together. I have done this several times and never had a problem yet. Just curious thanks.
-------------
Jay
Replies:
Posted By: Velocity Motors
Date Posted: August 14, 2003 at 7:17 PM
Hey Jay, my rule of thumb is if there are two wires that do the same thing but are separated, there's a reason why they were. I would just make sure they are isolated from each other just in case. A relay is alot cheaper than a new ignition harness or ECM.
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
|