Remote Transmitter Doesnt Work

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=177
Printed Date: July 14, 2025 at 8:55 PM

Topic: Remote Transmitter Doesnt Work

Posted By: Mista T
Subject: Remote Transmitter Doesnt Work
Date Posted: March 29, 2002 at 4:49 PM

I have a Viper 300ESP on a 98 honda civic ex. The place where I work operates high frequency welding machines and they are somehow erasing my transmitters. Ive bought a new transmitter a month ago and now its not working. I tried to reprogram them but it didnt work. Is there a way I can get them to work without buying new ones?

Replies:

Posted By: Thinkster
Date Posted: April 03, 2002 at 1:59 AM

I can't imagine welding machines "erasing" your transmitters. The remotes are usuall programmed with a XX bit serial code that follows an algorithim to 'code hop' and I think it would be a bit hard to erase that code. however if the brain is code learning which I assume it is, it is possible for RFI to interfere with it's ability to receive the code cleanly from your remote. Do the remotes work ok away from your work or they just don't work at all?

Posted By: Mista T
Date Posted: April 03, 2002 at 4:19 AM

They dont work at all. It happened before and each time I was at work.

Print Page | Close Window