Remote Starts

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=17743
Printed Date: June 23, 2025 at 9:38 PM

Topic: Remote Starts

Posted By: miller
Subject: Remote Starts
Date Posted: August 18, 2003 at 5:45 AM

Has anyone come across hooking up the door trigger input to the interior light and the interior light being one of those ones that fade out and turn on ever time the ignition is turned off.
I am finding that the alarm is going off everytime you activate and then deactivate the remote start.

Do i have to directly to the door pins and use diodes or is there something else i can do????

thanks

Replies:

Posted By: floaterr
Date Posted: August 21, 2003 at 10:15 AM

truck model and alarm model?

move the trigger wire to the proper point and or delay the amount of time the system takes before it actually starts looking at it's inputs.

Posted By: jgstone
Date Posted: August 21, 2003 at 11:19 AM

use a diode to limit the resistance if the door trigger is negative trigger put the diodes cathode side towards the door trigger. if it is positive trigger then reverse the diode. this should take care of the alarm reading the domelight delay.

-------------
I like cars more than women, because their the perfect challenge.
___
______| \___
|_0___|____0_ }

Posted By: CruisinS&S
Date Posted: August 21, 2003 at 5:29 PM

Is your factory alarm going off or is it an aftermarket unit?

-------------
Cruisin Security And Sounds

Print Page | Close Window