Electro Luminescent indicator light
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=17909
Printed Date: July 15, 2025 at 7:30 PM
Topic: Electro Luminescent indicator light
Posted By: elrayodesinaloa
Subject: Electro Luminescent indicator light
Date Posted: August 21, 2003 at 5:49 PM
This is how DEI calls this little light. I'm installing one of this to an alarm system. According to the instructions the red wire goes to 12v constant, and the black to the armed signal from the alarm. I hooked the 12v to constant and the black tapped into the orange wire from the starter kill relay which is the armed output , but this thing stays on wether the system is armed or not. Anybody could help to find out why?
Replies:
Posted By: auex
Date Posted: August 21, 2003 at 10:06 PM
Diode isolate the ground when armed from the starter kill. The ground when armed is seeing a ground from the ignition.
-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.
I've been sick lately, sorry I won't be on much.
|