Remote Start installation
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=17918
Printed Date: May 19, 2024 at 10:01 AM
Topic: Remote Start installation
Posted By: NLZX
Subject: Remote Start installation
Date Posted: August 21, 2003 at 8:00 PM
I have a 91 ford explorer. I'm attempting to put a Crimestopper 2006FM remote start on it. I don't know how or where to connect the coil wire or the neutral safty switch. Any help you could provide would be much appreciated.
Replies:
Posted By: fordfan
Date Posted: August 21, 2003 at 8:29 PM
TAN / YELLOW AT COIL ON 3.0L
OEM opens start circuit
Posted By: dayzout
Date Posted: August 21, 2003 at 8:38 PM
for neutral safty . Just ground that wire I only use it when installing them on a 5 speed.
-------------
Posted By: NLZX
Date Posted: August 21, 2003 at 9:36 PM
I need to ground the tan / YELLOW wire? I have a 4.0L.. My problem is finding the wire and knowing what to do with it when I find it..
Posted By: dayzout
Date Posted: August 21, 2003 at 9:55 PM
if that is what the neutral safty wire is on the alarm
-------------
Posted By: samdub
Date Posted: August 21, 2003 at 10:05 PM
ground the neutral safety wire from the alarm connect tach wire from alarm too the tan / YELLOW wire do not ground this wire this is the coil wire color that you should connect the tach wire too you do not need neutral safety on this install
Posted By: samdub
Date Posted: August 21, 2003 at 10:07 PM
if its an auto transmisson
Posted By: NLZX
Date Posted: August 21, 2003 at 11:03 PM
My alarm says it can opperate in tachless mode as long as tach wire is "connected to a valid source" does that mean I can just ground the tach wire on my unit and not have to worry about anything? I'm really sorry to be such a bother...
Posted By: JWorm
Date Posted: August 22, 2003 at 9:05 PM
Connect it to the tach wire. Remote starters very rarely work well if not hooked up to tach. Some times it will start, othertimes it won't.
|