Window Roll-up and Ignition Kill

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=18060
Printed Date: June 15, 2024 at 6:12 AM

Topic: Window Roll-up and Ignition Kill

Posted By: sunfighter077
Subject: Window Roll-up and Ignition Kill
Date Posted: August 25, 2003 at 4:41 PM

Hey guys, I got a 2002 Pontiac Sunfire Gt and A Hornet 554t, I am trying to figure out a way to make the remote start turn it self off when the alarm is triggered and also have the windows roll up at the same time. Any help would be greatly appreciated Thanks

Replies:

Posted By: Beezie
Date Posted: August 25, 2003 at 8:38 PM

Why would you want the remote start to activate when the alarm is set?

Posted By: floaterr
Date Posted: August 26, 2003 at 7:58 AM

Bee'zie wrote:

Why would you want the remote start to activate when the alarm is set?

Why wouldn't you? Yest the remote start will keep the car from being drivin off but what about his radio,cell phone, cd's, and etc.... The alarm should be armed when remote started. The aux sensors should just turn off.

Posted By: floaterr
Date Posted: August 26, 2003 at 8:16 AM

sunfighter077 wrote:

Hey guys, I got a 2002 Pontiac Sunfire Gt and A Hornet 554t, I am trying to figure out a way to make the remote start turn it self off when the alarm is triggered and also have the windows roll up at the same time. Any help would be greatly appreciated Thanks

What about the H3/1 wire? This sends a rearm signal to the factory alarm when "the remote start is shut down". Since 75%+ of the time the remote start will not be turned off by remote you could live with the windows going up during those situations. Hopefully you haven't used this wire.

Sorry looked through the manuals and didn't see anything about the alarm functioning like normal when remote started (minus shock sensor of course). I think it's just one of those things that some alarms do and some don't.

Good luck
p.s. remember to program the h3/1 wire.