Clarion Ungo MS2005

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=18077
Printed Date: July 18, 2025 at 9:44 PM

Topic: Clarion Ungo MS2005

Posted By: AzDrag
Subject: Clarion Ungo MS2005
Date Posted: August 25, 2003 at 9:45 PM

I recently purchased this alarm and it didnt come with an installation diagram. I cant figure out what wires are for what. If anyone has this info please let me know. Post it or please email it to me.

Thanks

MrHunter602@hotmail.com

Replies:

Posted By: AzDrag
Date Posted: August 26, 2003 at 8:30 AM

Does anyone have any other suggestions?

Posted By: johnand
Date Posted: August 26, 2003 at 4:36 PM

I have on on the way to me, that should be here on Thursday. I can scan it and email it to you on Friday if you can wait.

I have been looking at the install manual for the 2004, just for a preview. It should work for everything except the remote start. You could follow the instructions for the 2007 for the remote start if you wanted.

Posted By: AzDrag
Date Posted: August 26, 2003 at 4:39 PM

Where would I find the wiring diagrams for the other alarms? Thanks for the help by the way.

Posted By: johnand
Date Posted: August 27, 2003 at 11:36 AM

Here is the 2004: https://www.currenttechgroup.com/products/clarion/Tech/Manuals_Ungo_Security_Zip/UNGO_MS2004_INSTALL.zip

Posted By: johnand
Date Posted: August 27, 2003 at 11:37 AM

Here is the 2007: https://www.the12volt.com/downloads/file.asp?ID=281

Posted By: johnand
Date Posted: August 29, 2003 at 9:03 AM

Mine didn't come with the installation manual either. Why are they not coming w/ installation manuals? Anyone got one?

Posted By: johnand
Date Posted: August 29, 2003 at 9:19 AM

I found one. I posted it on my site https://www.johnandtracey.com/Ungo2005/UNGO_%20MS2005_%20INSTALL.PDF">here

Posted By: johnand
Date Posted: August 29, 2003 at 9:21 AM

Sorry, link doesn't work, try this: https://www.johnandtracey.com/Ungo2005/UNGO_%20MS2005_%20INSTALL.PDF

Posted By: AzDrag
Date Posted: August 29, 2003 at 9:43 AM

Great! Thanks a lot. I definately appreciate it.

Posted By: faze
Date Posted: August 30, 2003 at 1:11 PM

i have a ms2005 and i got everything wired up except for the door locks (the car is a 96 sentra gxe) i'm putting door pops on the two front doors also and shaving all the door handles off along with the keyholes

any help would be greatly appreciated please

Posted By: Velocity Motors
Date Posted: August 31, 2003 at 12:39 PM

If your shaving the door handles, you don't need to lock/unlock the vehicle so use the unlock pulse to activate your driver side solenoid and use an AUX channel for the passenger side solenoid.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: faze
Date Posted: August 31, 2003 at 2:56 PM

lol ok figured that out myself today ...i completely removed the smart entrance module from the car and got the drivers door completed(had to install a relay to reverse the polarity and so on....but now i've run into a problem on the passenger side..on the schematic for the alarm the passenger side unlock is - 500mA and i'm not getting any power to it at all unlike the drivers unlock which showed power till the unlock was hit.....i;mn baffled at this part any help would be appreciated thanks