Print Page | Close Window

1988 Acura Legend Keyless Entry Problem.

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=18106
Printed Date: July 13, 2025 at 11:33 AM


Topic: 1988 Acura Legend Keyless Entry Problem.

Posted By: bigacuralvr
Subject: 1988 Acura Legend Keyless Entry Problem.
Date Posted: August 26, 2003 at 1:45 PM

Ok...I have installed the Black Widow 852 Keyless Entry into my sister's 88 legend. However, the factory alarm goes off everytime the door is opened. I found the factory alarm brain, and there is 5 disarms and one arm, which are all the same color as the unlock and lock wires in the drivers kick panel. So, my question is how do I get the factory alarm to go away, or is there a way to integrate it into this system?? Everything works...ie: doors unlock, lock, lights flash...everything. This remote start does not have the factory arm/disarm wirs, so that is not an option. Anyways, please give me any hints!! I put this work into my sisters car, and it doesn't work!!! Thanks guys!



Replies:

Posted By: draasch
Date Posted: August 26, 2003 at 6:44 PM
you can use the outputs from the K/E door locks and tie them into the factory alarm wires.

you need to use a diode in-line.
ie: the unlock wire from your keyless wire, t-tap off of the wire and go to this wire:
OEM Alarm Disarm GREEN/ RED (-) DRIVER KICK PANEL

put the diode in-line with the band towards the keyless entry. your keyless entry will turn off the facotry alarm when it gets a neg. pulse from the unlock wire....


-------------
Good Luck
David
Ace Security
813-376-9778
Tampa
Donate to the 12volt





Print Page | Close Window