Viper 790XV remote instructions
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=18119
Printed Date: July 12, 2025 at 10:38 AM
Topic: Viper 790XV remote instructions
Posted By: b4tn
Subject: Viper 790XV remote instructions
Date Posted: August 26, 2003 at 5:29 PM
Does anyone have detailed instructions for the remote? The manual that came with the alarm is not very clear on how to program it and use the features and what the features do.
Replies:
Posted By: b4tn
Date Posted: August 26, 2003 at 8:53 PM
The only thing I need to know is how to turn on paging, and if you are in program mode and press the Aux key it has a few settings either the trunk icon is on or the hood icon or both. What is that?
Posted By: cpgoose
Date Posted: August 27, 2003 at 6:53 AM
Do you have both manuals for the alarm, the owner's and the install manual? If so, I would think those are the only ones out there for the alarm. ------------- Q: What's the best nation in the world?
A: Donation! Donate to the12volt.com
Posted By: b4tn
Date Posted: August 27, 2003 at 6:56 AM
Yeah I have both. the owners manual doesnt really go into detail on how to program the remote.
Posted By: Big Dog
Date Posted: August 27, 2003 at 8:21 AM
Hey b4tn,
Take a look on page 16 of the owner's. It explains how to turn page mode on/off. BTW use the panic button to turn page on or off not aux. Single beep = on / double beep = off.
As far as I remember aux doesn't change any parameters in program mode but is used for trunk release, silent mode and timer mode.
I don't want to repeat info you might have, but if it isn't what you're looking for let us know.
-------------
Prepare your future. It wasn't the lack of stones that killed the stone age.
Posted By: b4tn
Date Posted: August 27, 2003 at 8:57 AM
Big Dog wrote:
Hey b4tn,
Take a look on page 16 of the owner's. It explains how to turn page mode on/off. BTW use the panic button to turn page on or off not aux. Single beep = on / double beep = off.
As far as I remember aux doesn't change any parameters in program mode but is used for trunk release, silent mode and timer mode.
I don't want to repeat info you might have, but if it isn't what you're looking for let us know.
While in Program mode if you press the Aux button once the hood icon comes on, push it again and the trunk icon comes on, push it one more time and both trunk and hood icons come on. I have no idea what this is for and the manual doesnt explain it. As for everything else Thanks that makes it a bit more clear.
|