Print Page | Close Window

12v sources at the fuse panel

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=18129
Printed Date: July 09, 2025 at 7:24 PM


Topic: 12v sources at the fuse panel

Posted By: 80085
Subject: 12v sources at the fuse panel
Date Posted: August 26, 2003 at 8:55 PM

i tested 2 open spots in my fuse panel (99 civic), and they test 12v.  are these good places to use as 12v sources for relays i want to use for accessories?  if so, would i need to fuse the connection?  i can connect to these sources with female disconnects.



Replies:

Posted By: xetmes
Date Posted: August 26, 2003 at 8:57 PM
how many amps you plan on drawing? Or what do you plan on hooking up, some lights? Should be ok, an amp, no...




Posted By: 80085
Date Posted: August 26, 2003 at 9:02 PM
no, not for a stereo amp.  i got that on 8awg wire straight to my battery.  i'm thinking of using it for a trunk release solenoid, timed headlights.  would i need a fuse?




Posted By: xetmes
Date Posted: August 26, 2003 at 9:06 PM
I dont know for the trunk release i would think it is ok, what do you mean the headlights? to trigger the headlight relay or to actually drive them? Triggering them should be fine, but i dont think i would drive them with it. Fuse, well i say fuse everything, it cant hurt. posted_image




Posted By: 80085
Date Posted: August 26, 2003 at 9:11 PM
well, there's a (-) trigger from my alarm, and i want that as the trigger for a relay to power my headlights.  the trigger's timer can be set, and i don't plan on setting it to more than 15 sec.




Posted By: HuskiePJN
Date Posted: August 29, 2003 at 1:05 PM

As long as your lights won't be running from the fuse box 12v source for an extended period of time, you should be fine.  But I would fuse the wire to be safe.  My only concern with using a 12v source from a fuse box is that you can't soder the connection or secure it well.  Make sure you don't run too much from that source.  Good luck...



-------------
...o0O P.J. O0o...





Print Page | Close Window