Print Page | Close Window

Ignition Wiring, Module Locations

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=18147
Printed Date: May 03, 2025 at 6:31 PM


Topic: Ignition Wiring, Module Locations

Posted By: spy88
Subject: Ignition Wiring, Module Locations
Date Posted: August 27, 2003 at 7:25 AM

Does anyone know what wire is used for the Ignition Kill (Engine Disable) feature in the stock '98 Grand Cherokee alarm system? Also, where in the vehicle are the alarm AND the keyless entry modules located? (I have a power sun-roof so I don't believe the keyless is located in the overhead counsle)

Thanks!




Replies:

Posted By: 10nesne1
Date Posted: August 27, 2003 at 7:22 PM
All Jeep G. Cherokee comes with keyless entry and some comes with factory alarm system. I don't think the Jeep has an Ignition Kill.

If you want an Ignition Kill than you should buy an alarm system and install it on. Is pretty difficult to find the factory alarm system? It may located under the driver's or passenger side dash.

Good luck


Print Page | Close Window