keyless entry door lock problems
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=18214
Printed Date: May 14, 2025 at 8:15 PM
Topic: keyless entry door lock problems
Posted By: brandonb316
Subject: keyless entry door lock problems
Date Posted: August 28, 2003 at 8:54 PM
This is my first keyless entry install. All of the wires are connected, except the 2 lock/unlock wires. I am not sure on how to wire them. I found the WHITE/ green wire, but i don't want to screw anything up. Thanks brandon
Replies:
Posted By: auex
Date Posted: August 28, 2003 at 9:18 PM
What kind of car/alarm? I assume it a chrysler/dodge vehicle, do you have resistors?
-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.
I've been sick lately, sorry I won't be on much.
Posted By: JWorm
Date Posted: August 28, 2003 at 10:04 PM
Also, do you have the factory alarm....cause if you do, you would probably have to use a dark GREEN/ orange wire to control the alarm/locks instead. Its kinda scary we pretty much know what kind of car you have based on the color of a wire, but you should try to give us a little more info to work with. Make/ model/ year of vehicle and make/model of keyless. Does it have built in relays or not?
Posted By: auex
Date Posted: August 28, 2003 at 10:10 PM
Funny isn't it, just a single wire color and we can figure out all kinds of stuff.
-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.
I've been sick lately, sorry I won't be on much.
|