ford probe mazda mx6 immobo
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=18257
Printed Date: July 23, 2025 at 8:14 PM
Topic: ford probe mazda mx6 immobo
Posted By: acker
Subject: ford probe mazda mx6 immobo
Date Posted: August 30, 2003 at 7:56 AM
I have a dead ford probe 2.5L 24V with no flashing immobo light (not on and not responding to the key fob) and no engine turnover. yesterday evening it was fine and has not exibited any problems at all previously. finding pinouts for a bosch immobiliser model number VIM125 bosch part No. 9 330 065 125 ford No. 94BB 19A366 AA would sure help or a decent wiring diagram for the vehicle. with the starter relay bridged it turns over but that dont get me any ht spark, have checked all fuses and power to the coil/distributer unit so im pretty sure with that and the immobo light not operating that its the immobo unit. i would like to bridge a few connections to take it out of the circuit before i rush out and buy another expensive one.
thanks in advance
Ian Adkins
-------------
Ian Adkins
Replies:
Posted By: b4tn
Date Posted: August 30, 2003 at 8:53 AM
Have you tried https://www.probetalk.com ?
|