Help with Viper 690xv Door lock harness

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=18287
Printed Date: June 04, 2024 at 3:05 PM

Topic: Help with Viper 690xv Door lock harness

Posted By: fishing
Subject: Help with Viper 690xv Door lock harness
Date Posted: August 30, 2003 at 8:42 PM

I need help with the door lock harness instructions. The Viper 690xv installation guide says I need to refer to the Document No. 1041. Does anyone have this? Or can you please help figure it out?

2000 Ford Exployer

I need detailed instuctions about connecting to my vehicle's door lock system.

Thanks for any help!!!!

-------------
12 volt rules

Replies:

Posted By: fishing
Date Posted: August 30, 2003 at 8:44 PM

It does have Keyless entry, sorry I forgot to mention that.

-------------
12 volt rules

Posted By: profuse007
Date Posted: August 31, 2003 at 1:03 PM

do you want the diagram to the car?

-------------
Houston,TX
"The two most common elements in the universe are H+ and stupidity" (Ellison).

Posted By: draasch
Date Posted: August 31, 2003 at 2:50 PM

no, he has the car info. the output from the alarm is a positive one. do you know if you change the output by going into programming mode??? or do you just need to wire up some relays?????

the door locks are wire in the truck are neg.

-------------
Good Luck
David
Ace Security
813-376-9778
Tampa
Donate to the 12volt

Posted By: JWorm
Date Posted: August 31, 2003 at 5:54 PM

Power Lock pink / YELLOW - driver kick panel
Power Unlock pink/green - driver kick panel

Connect the blue wire from the 690 to the pink/green
Connect the green wire from the 690 to the pink / YELLOW.
Thats it. Nothing tricky about this at all. No programming needed.

The outputs from the alarm are negative and positive. You hit unlock, it pulses negative on the bluw wire and positive on the green wire. You hit lock, it pulses negative on the green wire and positive on the blue wire. You don't need to worry about the positive pulses...they are for mostly GM vehicles.

Posted By: draasch
Date Posted: September 01, 2003 at 6:56 AM

i wasnt sure about them, thanks for the info..

-------------
Good Luck
David
Ace Security
813-376-9778
Tampa
Donate to the 12volt