factory ford keyfob programming
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=18390
Printed Date: July 27, 2025 at 5:30 AM
Topic: factory ford keyfob programming
Posted By: wieneke
Subject: factory ford keyfob programming
Date Posted: September 02, 2003 at 1:09 PM
i have a 94 cougar. and i bought it used and i never got my alarm remotes (factory 4 button ford) so i went to the dealer and bought one and the guy gave me the totally wrong instuctions for programming it. (he gave me the pats key sheet). so i will need the prgramming instructions . if anybody could help i would really appreciate it. thanks in advance.
-------------
smoke 'em if ya got 'em
Replies:
Posted By: CruisinS&S
Date Posted: September 02, 2003 at 5:59 PM
Follow this procedure and they will work:
Turn ign. to RUN or ACC. Momentarily jump pins in programming connector (located in LR qtr panel area). All doors will lock then unlock to confirm programming mode. Press any button on 1st transmitter. Doors locks will cycle to confirm prog. Press any button on 2nd transmitter. Turn ign OFF. Locks will again cycle to end prog. mode
-------------
Cruisin Security And Sounds
Posted By: wieneke
Date Posted: September 03, 2003 at 5:54 PM
yup. it worked thanks alot dude
|