roll up window module
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=18514
Printed Date: May 28, 2024 at 10:56 PM
Topic: roll up window module
Posted By: juce05
Subject: roll up window module
Date Posted: September 05, 2003 at 7:08 AM
ih im installing a 4 windows roll up module to my car. i have two chanels abailable a + and - . tha thing is that i dont know howw to make it work with these channels, because they just sent pulsaiting signals when the alarm is arm, and they are not strong enoguth to power the module. i f someone has an idia plese helm. thank you.
-------------
juceforu
Replies:
Posted By: floaterr
Date Posted: September 05, 2003 at 8:23 AM
Always put the car make/model and alarm, and the modules maker/number please. Sometime this info provides a *snap* in the persons memory.
1) what is the output you are using that is + and - ? Usually they are just (-) and either pulsed, latched, or timed.
2) if you are using 1; 4-window roll up module (au93-4?) then it only needs 1 (-) input to EITHER roll up or roll down the windows. I have this unit myself.
3) if it is an "output" then it will have enough of a signal to trigger the module. It's all transiterized now and requires a very low, low current trigger (pulse) to start itself up. Sounds like you might be using the wrong wires.
More info please... ;) Then I'm sure you'll get your answer.
Posted By: lathan
Date Posted: September 06, 2003 at 11:47 PM
yea i agree w/ floaterr, but if its not the wires then consider a relay.
-------------
Lathan Hites
"I'm sorry, without a credit card I'll be requiring a stool sample"
Posted By: juce05
Date Posted: September 07, 2003 at 8:39 AM
the car its a 94 lincoln continental,the alarm is commando fm 5005, and the window module its dr-4 from commando.i have 2 (-} outputs from the alarm do i need to add a relay to increase the power so the output channel can operate the module. another question how can use the starter desble (-) ouput to power an extra adcessory. thak you for your help. ------------- juceforu
|