gm passlock need help

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=18583
Printed Date: July 21, 2025 at 9:19 PM

Topic: gm passlock need help

Posted By: bear80
Subject: gm passlock need help
Date Posted: September 06, 2003 at 8:48 PM

i got this gm pass lock interfaceing model rs-plm. how do you wire this to a alarm with a built in starter. on the diagarm it says to plug the 2-pin orange connector of the rs-plm into the remote starter module. but my alarm do's not have a place to put the 2-pin can is there a way you can splice this in to the alarm wire's . our is there a place to get a diagarm on this.someone help me with this

Replies:

Posted By: 10nesne1
Date Posted: September 06, 2003 at 9:29 PM

Here had all the GM Vehicle Passlock bypass diagram. Good luck.

PassLock 1
PassLock 2
PassLock 3
GM V.A.T. System

Print Page | Close Window