Remote start help

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=18597
Printed Date: August 31, 2025 at 3:55 AM

Topic: Remote start help

Posted By: KiDFuZioN
Subject: Remote start help
Date Posted: September 07, 2003 at 12:18 AM

I need to know how to connect the wires from the relay for the remote start. What happened was that I took my car into the Honda Dealership for the ignition recall and they replaced the whole ignition harness and disconnected my alarm. I got all the wires connected except the Yellow & black from the relay and also the green wire from the relay. Do I connect all three wires to the starter wire on the ignition harness or do they go some where else.

Replies:

Posted By: Velocity Motors
Date Posted: September 07, 2003 at 7:16 AM

What model & year Honda is this ? Also what alarm system are you referring to ?

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: KiDFuZioN
Date Posted: September 07, 2003 at 7:39 AM

Its a 1998 Accord Coupe 4 Cyl and the alarm is the Viper 550 ESP.

Posted By: 10nesne1
Date Posted: September 07, 2003 at 9:08 AM

Reviewed the Viper 550ESP alarm system. It doesn't have the Yellow/Black wire. The Green wire from the relay pack might be your Second Ignition or Accessory wire. Here is the Viper 550ESP wiring diagram (Viper 550ESP Wiring Diagram). If you can't make it work than you should bring it to your location Stereo Shop. good luck.

Posted By: KiDFuZioN
Date Posted: September 07, 2003 at 9:46 PM

I know it's not in the manuel. Also the wires are seperate. One wire is black and the other is yellow. The green wire looked like it was connected to the starter wire and the other two wire also looked like it was connected to the starter wire but they don't seem to connect to each other. The wire is coming from the relay and I can't seem to find out how to connect the wires. Am I supposed to completely cut the starter wire and connect the yellow and black wire to one end and the green to the other end or do all three wires connect to each other. The honda technicians cut the wire and it looks weird because the wires aren't connected to each other but the wire on each end is the same color. BLACK/ White, which is the starter wire.