Print Page | Close Window

need help to hook up passlock2 to alarm

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=18624
Printed Date: August 29, 2025 at 1:01 PM


Topic: need help to hook up passlock2 to alarm

Posted By: bear80
Subject: need help to hook up passlock2 to alarm
Date Posted: September 07, 2003 at 7:30 PM

how do you wire a alarm to the bypass so the starter will work all the  diagarm i have seen show  you how to wire it to the ignition wires not to the alarm so i can hook it up i have a performance teknique alarm  and a carbine gm pass lock interfacing if this can help.



Replies:

Posted By: Chris Luongo
Date Posted: September 07, 2003 at 7:46 PM
what?



Posted By: JWorm
Date Posted: September 07, 2003 at 9:00 PM
posted_image
huh?



Posted By: c2deez
Date Posted: September 07, 2003 at 9:03 PM
Most factory security bypass systems use a neg(-) input to activate the system. Most alarm systems usually have a neg(-) third ignition output wire. This 3rd ignition (-) can be used to activate the bypass. Unfortunately, I'm not familiar with the alarm, or the bypass that you are using, so I can't be specific.




Print Page | Close Window