Print Page | Close Window

clutch bypass wire on a 94 integra

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=18709
Printed Date: March 28, 2024 at 2:46 PM


Topic: clutch bypass wire on a 94 integra

Posted By: quixs1lver
Subject: clutch bypass wire on a 94 integra
Date Posted: September 09, 2003 at 8:12 PM

i have a 94 integra and i installed a valet 551t remote start on to my car. everything works, that is when you push the clutch pedal down. i have read all the post about bypass the clutch and i found the wires, however there is little next to no room for me to acutally work around these wires. so i was wondering besides the clutch pedal area is there any other place that i could tap into the wires? i found the post about the factory relay behind the sunroof swtich but i didnt quite understand it...so if anyone knows anything about the location of these wires...any help would greatly be appreciated

--quix




Replies:

Posted By: Mr.Swifty
Date Posted: September 09, 2003 at 11:03 PM
The Blue with black tracer wire is the one you want....and there is enough room to work, just be patient.....I know it there is enough room, I just did one the other day....and it's a pain....but there is room....so tap into the blue/black wire with your wire that will supply negative before start/during running wire.




Posted By: quixs1lver
Date Posted: September 10, 2003 at 12:48 PM
so would i have to disconnect the plug from the clutch? or should i just work with it?





Print Page | Close Window