rs-850 lcd
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=18837
Printed Date: May 17, 2025 at 6:46 PM
Topic: rs-850 lcd
Posted By: almeida79
Subject: rs-850 lcd
Date Posted: September 12, 2003 at 3:02 PM
Does anyone know if the autopage rs-850lcd remote start alarm, starter kill wire also act as an antigrind output or will i have to wire an output when running wire to the relay along side with the starter kill wire and isolate them from each other thanks Jay
-------------
Jay
Replies:
Posted By: jrilla
Date Posted: September 12, 2003 at 4:22 PM
I know for sure that the 750 model worked that way, so I assume that they kept that the same. I could not say for sure though, I havent tested an 850 out yet.
-------------
J Rilla
Owner/Installer
Posted By: almeida79
Date Posted: September 12, 2003 at 5:13 PM
which way are you saying that the starter kill also acts as an antigrind or that i also have to wire an output while running wire to the relay.
-------------
Jay
Posted By: jrilla
Date Posted: September 12, 2003 at 7:03 PM
On the Rs-750, the Orange wire which is the (-) armed output which is your starter kill trigger, produces the (-) output when armed as well as when the car is running by the power of the remote starter unit, so the armed output will take care of the anti-grind relay as well as your starter kill.
-------------
J Rilla
Owner/Installer
Posted By: almeida79
Date Posted: September 13, 2003 at 5:38 AM
Thanks for your help i'm sure it's the same way on the 850 lcd.  ------------- Jay
|