Print Page | Close Window

Starter Wire

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=18858
Printed Date: June 07, 2024 at 5:42 AM


Topic: Starter Wire

Posted By: KiDFuZioN
Subject: Starter Wire
Date Posted: September 13, 2003 at 1:17 PM

I was wondering if you guys could help me out with this one. For the starter kill relay do I cut the starter wire on the ignition harness or is there another starter wire some where else that I should use. Thanks guys.



Replies:

Posted By: auex
Date Posted: September 13, 2003 at 3:40 PM
On the ignition is the easiest place to find the wire, you could find it elsewhere if you wanted to.

-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.




Posted By: NowYaKnow
Date Posted: September 13, 2003 at 3:59 PM
Yeah usually the ignition harness around the key cylinder is the easiest place to find the wire dependings on the car of course.. (Cavaliers, Grand Ams and some others it's much easier to get in the left kick area going into the firewall.) Also note that it's equally easy for a thief to find. Basically the closer to the starter you go, the better it is security wise. So yeah the starter wire in the ignition harness will be fine.





Print Page | Close Window