complicated question...please help

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=18862
Printed Date: May 15, 2025 at 2:15 AM

Topic: complicated question...please help

Posted By: defective
Subject: complicated question...please help
Date Posted: September 13, 2003 at 2:39 PM

I need to install an alarm in a 2003 3/4 ton Chev. Problem herin lies that it has dual keyfobs. this means it adjusts his seat and everything when it's him but when his wife uses her keyfob, it adjusts to her. Is there anyway to keep this when installing an aftermarket alarm? or is there any good way to interface an aftermarket proximity/microwave sensor and aditional door pins to the factory alarm?

Somebody experienced with this situation please message me back.....it's a toughy

Replies:

Posted By: auex
Date Posted: September 13, 2003 at 3:39 PM

You should use a factory keyless integration alarm. That way he retains his factory remotes and settings and has an aftermarket alarm.

-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

Print Page | Close Window