Reset my remote car alarm

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=18943
Printed Date: July 13, 2025 at 9:35 AM

Topic: Reset my remote car alarm

Posted By: tubbscarol
Subject: Reset my remote car alarm
Date Posted: September 17, 2003 at 11:06 AM

For some reason my car alarm do not recognize my remote, I have change the battery in the remote and it still will not work, My car alarm is called nobody messes with IT JT series the model JT2, this was installed in 1997 the place that installed it is no longer in business. I have gotten on line and found the name of the company and called the number for some kind of support, it was the wrong number. I need help really bad if anyone has any idea on what I can do to salve this problem I would greatly appreciate it

Thank You

xCarol

-------------
;)

Replies:

Posted By: Velocity Motors
Date Posted: September 17, 2003 at 11:13 AM

It may be soemthing as simple as reprogramming the remote to the CPU. I have never heard of this company before but is there an FCC ID number on the CPU casing or on the remote control ?

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: tubbscarol
Date Posted: September 17, 2003 at 11:34 AM

Yes there is a number in side of the remote control but it does not say FCC ID it is just some numbers. I would gladly give you the numbers from the alarm remote when I get home. The only way I knew the name of the company I did an internet search with nobody messes with IT, which is the name that is ingrained on my remote control. I do appreciate your help. posted_image

Thank's

-------------
posted_image

Posted By: Velocity Motors
Date Posted: September 17, 2003 at 11:47 AM

Here is a site that may help you find out the reprogramming instructions. https://www.adelcom.net/JTI1.htm

They sell this alarm from the looks of it. Try them out first and see if they can help you out.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: tubbscarol
Date Posted: September 17, 2003 at 2:05 PM

This is the web site that i call and it was a wrong number posted_image I even emailed them but I diden't get a reply.

Thank's

-------------
posted_image

Posted By: Scott35
Date Posted: September 17, 2003 at 3:42 PM

According to my instructions, Valet mode code learning-turn the ignition on and the valet switch on. Next press button 1 of the remote control for 5 seconds while simultaneously pushing the door pin switch 3 times. The siren will chirp 3 times to confirm that the code has been learned.

-------------
Tacomacrew