Impact sensor + Field disturbance sensor

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=18973
Printed Date: May 13, 2024 at 11:55 AM

Topic: Impact sensor + Field disturbance sensor

Posted By: skyace4
Subject: Impact sensor + Field disturbance sensor
Date Posted: September 17, 2003 at 9:30 PM

Here is a setup that is to have a 4 wire field disturbance sensor added to a origional 4 wire Shock/Impact sensor of a Commando Alarms RS-560 unit.

Do I connect the Red + 12V. wire directly to a seperate fused source or to the same Red wire of the shock/impact sensor?

Where are the diodes to be placed and pointing in what direction on the sensors since I only have a single sensor input?

I had been told by a neighbor that I should put a switch on the Red + 12 V. wire of the perimeter sensor since snow or rain could set the alarm off at 3:00 AM ( gets the neighbors ticked ).

How am I to correctly do this, help is appreciated.

skyace4@hotmail.com

:errr:

Replies:

Posted By: Velocity Motors
Date Posted: September 18, 2003 at 1:01 AM

Installing Perimeter Sensor & Dual Impact Sensor Using Only One Set of Inputs

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: skyace4
Date Posted: September 18, 2003 at 2:05 AM

Thanks Jeff,

I will get the wiring for the sensors done on Friday if the alleged hurricane does not hit the New York City area.

otherwise it will be done next week.

-------------

Posted By: Velocity Motors
Date Posted: September 18, 2003 at 10:05 AM

Good luck with the installation and watch out for flying cars.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA