2000 chev P/U factory alarm
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=19036
Printed Date: May 04, 2024 at 6:32 PM
Topic: 2000 chev P/U factory alarm
Posted By: cool_greg
Subject: 2000 chev P/U factory alarm
Date Posted: September 19, 2003 at 7:27 AM
heres my problem, i've installed autopage 610's in 2 chev trucks, hooked up the factory alarm disarm wire, and when i use the autopage remote to unlock or remote start it sets off the factory alarm. I've checked that i'm getting the pluse out of the remote starter to disarm the factory alarm and it's there upon unlock and start buttons pressed, any ideas anyone?
-------------
Just a Guy, Wiring up those Vehicals
---------------------------------
Gool_Greg
Replies:
Posted By: Velocity Motors
Date Posted: September 19, 2003 at 7:46 AM
What wire did you use for the OEM disarm wire & where did you grab it at ?
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: cool_greg
Date Posted: September 19, 2003 at 8:20 AM
i used the lt grn at the bcm, I can see the -12v pluse at that wire when i use the factory remote to unlock
-------------
Just a Guy, Wiring up those Vehicals
---------------------------------
Gool_Greg
Posted By: zargon
Date Posted: September 19, 2003 at 3:04 PM
you have to check the wire by using the key cylinder.
-------------
zargon ruler of estranorth
Posted By: cool_greg
Date Posted: September 20, 2003 at 1:52 AM
can you explain that to me?
-------------
Just a Guy, Wiring up those Vehicals
---------------------------------
Gool_Greg
|