Print Page | Close Window

DEI LED’s

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=19058
Printed Date: May 31, 2024 at 11:27 PM


Topic: DEI LED’s

Posted By: fireman1321
Subject: DEI LED’s
Date Posted: September 19, 2003 at 5:04 PM

I have 2 questions about adding LED's on a new DEI alarm... It came with a blue one and I want to add 2 green... the output is a (+) 2 volt output and the LED's are 2.1 volt... was wondering if I would have to do it in a series?!?! and the second question is on the DEI alarms what are the polarity of the blue and red wires on the stock LED???

-------------
Future Fire Man



Replies:

Posted By: auex
Date Posted: September 19, 2003 at 5:25 PM
Yes you wire them in series. Red is positive and blue is negative,

-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.



Posted By: fireman1321
Date Posted: September 19, 2003 at 7:35 PM
thank you very much

-------------
Future Fire Man


Print Page | Close Window