window roll up
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=19097
Printed Date: November 08, 2025 at 8:22 AM
Topic: window roll up
Posted By: brianh
Subject: window roll up
Date Posted: September 20, 2003 at 6:50 PM
Has anyone out there done this on a 1999 Eddie Bower Ford Explorer ? The Commando unit that I have says that there is two diffrent systems. An A and a B system. I belive I can just feed the module 12 volts,ground,and input from alarm and then cut and splice the window wires. If there is anything out of the ordinary about this please let me know. Thanks in advance.
-------------
Brian
owner/installer
Sight & Sound Car Stereo
"all electronic equipment runs off of smoke, once you let it out, it stops working"
Replies:
Posted By: Velocity Motors
Date Posted: September 21, 2003 at 9:43 AM
Hey Brian , the system is a Type A . What you have described is all you have to do. Nothing special about the Ford's wiring.
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: brianh
Date Posted: September 21, 2003 at 2:36 PM
Thanks for the quick answer Jeff. I fiqured thats all that I had to do but I wanted to double check. I should have to go into the driver door to get that window wire but the rest should be in the kick right? Thanks for your help.
-------------
Brian
owner/installer
Sight & Sound Car Stereo
"all electronic equipment runs off of smoke, once you let it out, it stops working"
Posted By: Velocity Motors
Date Posted: September 22, 2003 at 4:22 PM
Yup.
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
|