Remote Start w/ Starter Kill
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=1918
Printed Date: May 15, 2024 at 9:25 PM
Topic: Remote Start w/ Starter Kill
Posted By: aLfer
Subject: Remote Start w/ Starter Kill
Date Posted: July 13, 2002 at 6:24 PM
I have a DEI 553T hornet remote start alarm, and a starter kill relay, Im installing in my 97 accord. My question is, do i wire the relay before or after the remote start wires from the cpu? Also, 86 goes to 12V, 85 to ground when armed, 30 to ignition switch of starter wire, and 87a to motor side of starter wire right? Thanks in advance...
Replies:
Posted By: christophe
Date Posted: July 13, 2002 at 8:20 PM
you got it, and purple from the dei unit will go to 87a motor side of starter wire.
Posted By: Velocity Motors
Date Posted: July 14, 2002 at 6:36 AM
The relay configuration you have above.... I don't think that it is right. Hook up a relay like this otherwise if you hook up the relay like you have the starter will stay engaged the second you arm the system. : - 86: Switched 12 volts from Ignition #1
- 87: NOT USED
- 85: Starter disable wire form alarm ( PURPLE I believe is the color )
- 30: Motor side of the Starter wire ( BLACK/ WHITE )
- 87a: Keyside of starter wire ( BLACK/ WHITE )
------------- Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: aLfer
Date Posted: July 19, 2002 at 7:47 PM
OK, so do I put the starter kill relay on the switch side, or the remote start wire from the alarm closer to the switch? In other words, when I activate the remote start, does the starter kill get disabled if the alarm is still armed?
Posted By: Velocity Motors
Date Posted: July 19, 2002 at 9:53 PM
If you wire it up like the above diagram, the starter disable will only activate when the system is armed or tripped. When the remote starter is activated , the module temporarily releases the starter disable relay to activate the start sequence of the car. After you arm the vehicle again the relay will be activated again. ------------- Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
|