viper 300 diagram

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=1919
Printed Date: May 29, 2024 at 12:43 AM

Topic: viper 300 diagram

Posted By: whiteknight
Subject: viper 300 diagram
Date Posted: July 13, 2002 at 8:20 PM

Im looking for a wire guide for a viper 300. the alarm wont shut off with the vallet switch and when its turned off with the remote the auto arm keeps flashing the led when the truck is started the alarm keeps flashing and it arms again.I figure its a detached wire and when I got under the dash it looks like an electritions nightmare . ayn ideas??

-------------
If the part wont come off,Torch It.

Replies:

Posted By: Xeon852
Date Posted: July 14, 2002 at 12:37 PM

For the 300HF (original model, not the + or ESP):

https://www.directed.com/guides/pdfs/N430V.pdf

Posted By: mike simonelli
Date Posted: July 15, 2002 at 9:53 PM

make sure the red wire has 12 volts ignition on it sounds like its missing.

Posted By: mobiletoys2002
Date Posted: July 15, 2002 at 10:17 PM

yellow is ignition on that alarm not red

your red is constant power the yellow is ignition

Print Page | Close Window