door lock bypass

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=19244
Printed Date: May 05, 2024 at 1:03 AM

Topic: door lock bypass

Posted By: quixs1lver
Subject: door lock bypass
Date Posted: September 23, 2003 at 10:56 PM

i finally got a new alarm that i installed myself - python 3000esp.

with a Valet 551t remote starter

my problem is i have a 94 rs. with no power door locks but i added door lock acutuators

and when i disarm the alarm - door locks unlock- remote start- doors lock again

but if i just start the car with the key the doors dont lock at all. could there be a way that i could bypass the ignition lock on the remote start. b/c it is very tidious to unlock the car and remote start and then having to unlock it again with key.

Replies:

Posted By: auex
Date Posted: September 24, 2003 at 7:32 PM

You didn't hook the ignition output(tells the alarm when the car is running with the key and not when the remote start is active) from the RS unit to the ignition input of the alarm. The Remote start unit has an output that is supposed to supply the alarm it's ingition sensing. If the alarm is still hooked to the ignition, then it will think that you started the car with the key and the doors will lock because the door is closed.

-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

Posted By: quixs1lver
Date Posted: September 24, 2003 at 9:50 PM

so i would hook yellow=(+)12v ignition output to RF systemy to yellow ignition wire from my alarm?