1st and 2nd ignition ?
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=19401
Printed Date: May 19, 2024 at 5:06 AM
Topic: 1st and 2nd ignition ?
Posted By: michaeltam2k
Subject: 1st and 2nd ignition ?
Date Posted: September 27, 2003 at 11:15 PM
I've just install the clifford matrix rs3.5 in my 03 sequoia . I would like to know does it matter if I don't wire the 2nd ignition wire and what is the different ? anyone thank you so much ...
Replies:
Posted By: c2deez
Date Posted: September 27, 2003 at 11:20 PM
Sometimes, if you don't wire all the necessary ign and acc wires, the r\s will not work. Let's put it this way key features may not work like the air conditioning or blower motor. Also, many cars won't start w\o all ign wires connected.
Posted By: Velocity Motors
Date Posted: September 27, 2003 at 11:27 PM
You HAVE to connect all IGN wires for proper operation of the vehicle after remote start. Common problems that arise are computer error on the dash or transmission computer's not engaging. This could end up costing you $ 1000's in repair bills if the wires are not powered up properly during remote start. As c2deez mentioned, some of the more obvious reasons to power up the 2 nd IGN or ACC wires is for full function of the RS system.
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
|