Lost Code to Viper Remote

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=19584
Printed Date: June 22, 2025 at 7:25 PM

Topic: Lost Code to Viper Remote

Posted By: marctronixx
Subject: Lost Code to Viper Remote
Date Posted: October 02, 2003 at 1:57 PM

hi,

i forget which model viper i have but i have the remote start and my x-mitters have the 4 buttons on them (my alarm has a antenna for increased range if that helps any).

well, i dont drive the car much, so the remote has been on the keychain and has lost sync with the alarm.

so, is there something I can do to help the remote speak to the alarm again? i have been pressing the button on the remote but that has not yielded any results.

thanks for any info!

Replies:

Posted By: auex
Date Posted: October 02, 2003 at 9:46 PM

Find the brain of the alarm and then go to Directed.com and download an install manual. Find the section that tells you how to program new remotes for your alarm and try to recode the remote to the alarm. If the alarm doesn't make a noise when you push the remotes button then the remote is bad.

-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

Posted By: marctronixx
Date Posted: October 06, 2003 at 5:23 AM

thank you for you reply.

Print Page | Close Window