96 Chevy Tahoe
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=19646
Printed Date: May 16, 2025 at 5:36 AM
Topic: 96 Chevy Tahoe
Posted By: Ikillrinst
Subject: 96 Chevy Tahoe
Date Posted: October 04, 2003 at 4:10 PM
I just recently removed my old alarm which was a Code Alarm Surestart LX and installed a new Code Alarm PC7600... everything works like it should except when i auto start the car the remotes work when they want to.. Once i get the car to shut off from remote start the remotes work perfectly.. if i press the buttons nothing happens, i cant shut the car disarm or anything... its like something is interfering with the remotes transmitting while the car is in auto start.... anyone have any ideas?????? wrongconnec
Replies:
Posted By: elrayodesinaloa
Date Posted: October 05, 2003 at 2:13 AM
how long do you wait once you remote start it, to start pushing the buttons? maybe you can try to let the system stabilize a little before you push other buttons. I've installed PC's but never had that problem I'll go through the manual and let you know if I find something. maybe you have a bad module???
Posted By: Ikillrinst
Date Posted: October 05, 2003 at 8:31 AM
doesn't matter if i wait or start hitting buttons immediately, i have tried both ways.. i took the 7600 PC30 and dna out of my 93 SHO and put it in my Tahoe... i get the same problem, so i know it's not the alarm itself... i used the schematics i got from this website to install it... i have checked it 5 times and all wires are connected as per the12volts install sheet... i called code alarm and they seem to think it is a wrong connection somewhere.... but where? what? i have no clue... i do not want to have to bring it in to a shop to have them look it over...
Posted By: Ikillrinst
Date Posted: October 05, 2003 at 10:17 AM
i just noticed it seems like i lose range and distance once the car is running on auto start... it has to be something with my car and not the unit, something i did wrong or something other than the pc30 and the dna... maybe a bad antenna? when the car is not running i can arm, disarm, and remote start it from half way up the block... once it remote starts i have to be right up on it to get anything... if i even get anything at all...
Posted By: Ikillrinst
Date Posted: October 09, 2003 at 5:42 PM
Ok People, problem solved. I spoke to a tech otp and we isolated the problem as being EMI interference..... Thank You MC
Posted By: my12volts
Date Posted: October 09, 2003 at 7:47 PM
cool u got prob solved
|