Print Page | Close Window

uninstalling Alpine 8046 *please help*

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=19794
Printed Date: July 18, 2025 at 8:14 AM


Topic: uninstalling Alpine 8046 *please help*

Posted By: gecko
Subject: uninstalling Alpine 8046 *please help*
Date Posted: October 07, 2003 at 8:22 PM

I purchased a vehicle that contains the remains of an Alpine 8046 alarm. To my knowledge, there are vital pieces missing but I'm not sure what. I need help to untangle and make sense of the mess of wires I've been left with under my dash so I can remove what's left & start clean. I don't need or want the alarm, but I don't want to proceed without some guidance because I have no idea which wires are crucial and which ones are useless. Please help if anyone has information. Thank you!

GM




Replies:

Posted By: auex
Date Posted: October 07, 2003 at 10:23 PM
Just start taking the alarm out wire by wire. The only thing that you should have to reconnect is the starter wire.

-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.



Posted By: gecko
Date Posted: October 07, 2003 at 10:57 PM

That's pretty much the path I started out on but ran into a few snags under the steering column. There is a wire harness spliced into a few wires under there & due to my ignorance, I have no idea where to re-connect the wires. Before I cut something important, I figured I'd ask for some advice. Thank you for the reply!posted_image

GM


Print Page | Close Window