Autopage RS-750LCD

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=1983
Printed Date: July 12, 2025 at 3:58 AM

Topic: Autopage RS-750LCD

Posted By: jlaudioholic
Subject: Autopage RS-750LCD
Date Posted: July 16, 2002 at 1:23 PM

I have a Autopage RS-750LCD alarm that I tried to install in my 1996 camaro. The camaro already had a factory keyless enty alarm system. I used a web site that show how to insall an alarm on this paticular car and tapped into the specific wires it instructed to tap into. After hooking up all these conections including door lock relay, trunk , and hoop pin switch I decided to try it out(note: I did not hook the starter kill relay, or the remote start relay either). The lock, unlock, and trunk functions all worked, but the car absolutly would not start with the key! Is this because I still have the existing factory alarm, or because I did'nt hook up the starter kill relay? If its because the factory alarm is there any kind of module I can buy to by-pass the factory system? Any replies would be of great assistance.

Thanks,

John

Replies:

Posted By: jlaudioholic
Date Posted: July 17, 2002 at 8:32 AM

can anybody help me on this?

posted_image

Posted By: Velocity Motors
Date Posted: July 18, 2002 at 7:22 AM

Did you end up cutting the starter wire in half and not install a relay ?

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: jlaudioholic
Date Posted: July 21, 2002 at 11:56 AM

I just did'nt install a starter kill relay at all.

Posted By: Velocity Motors
Date Posted: July 21, 2002 at 10:02 PM

Did you not bypass the VATS system ?? How did you do this ? The car won't start if the VATS sysetm has been cut or deactivated.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA