Print Page | Close Window

Window Control Module-Wiring Diagram?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=19892
Printed Date: July 14, 2025 at 6:47 PM


Topic: Window Control Module-Wiring Diagram?

Posted By: dxtreme_85
Subject: Window Control Module-Wiring Diagram?
Date Posted: October 09, 2003 at 8:56 PM

Here is my problem.  I just purchased a window control module (actually it came free with my alarm) that is supposed to roll my windows up and down.  It does do both.  My problem is that when it came packaged with my alarm, there was no wiring diagram to show me how to hook it up.  I have a 2001 Grand Am GT COUPE.   I want to be able to at the very least put my windows up and down via the remote.  Here is what the harness looks like:

from left to right: (10 wires total)
Red wire w/ 30amp inline fuse
Black wire w/ ring terminal(ground wire obviously)
Purple wire
Gray/Black tracer wire
WHITE/ Black tracer wire
Gray wire
White wire
Blue wire
Green wire
RED / Black Tracer w/ 30amp inline fuse

Please help as soon as possible.  I am installing this on Friday in the afternoon with the alarm.  If you want to see the alarm...go to ebay.com  search for "#1 2 remote start lcd alarm" and click the one that is 'buy it now' for like $130.00

Thanks, Terry




Replies:

Posted By: floaterr
Date Posted: October 10, 2003 at 9:15 AM
Sure they wherent on the back of the unit?

Search ebay and look for the module that looks the same then paste the ITEM NUMBER here.
Like this (does it look like any of these?):
3049788647   
3051332678
3051602754


We might be able to help then.




Print Page | Close Window