Print Page | Close Window

Alarm Overlay

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=19936
Printed Date: July 07, 2025 at 10:24 PM


Topic: Alarm Overlay

Posted By: Taz2661
Subject: Alarm Overlay
Date Posted: October 10, 2003 at 9:26 PM

Hi I live in the UK so i don't know if you can help me out, But here goes

I Just got a TOAD A850 Alarm Overlay as my car is a Peugeot 406 2.0 16v with just an immobiliser & remote dead locks ( I have both the Installation Manual for the alarm & the wiring diagram for the car ) links below

The Alarms is made to use the OEM key fob,

The problem i have is with the inhibit wire & Diodes & Resistor I just can't seam to see were they go on the central locking & i don't want to fit it & mess it all up :( by just guessing

Here are the links to the Toad A850 Alarm Manual       Peugeot 406 install Manual

Thanks for looking & i hope you can help me out, The links may take some time to load the pictures

Mick



-------------
Taz2661



Replies:

Posted By: Taz2661
Date Posted: October 14, 2003 at 8:55 PM

Can anyone help me out please posted_image

It's the wiring to the central locking that i need help with ( inhibit wire to the Central locking control unit ) do i need the Diodes

Thanks Mick

i think i've looked at the wiring diagram too much posted_image



-------------
Taz2661


Print Page | Close Window