Help with freedom 500 on 92 integra
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=19961
Printed Date: September 18, 2025 at 2:53 PM
Topic: Help with freedom 500 on 92 integra
Posted By: Cowboy Bebop
Subject: Help with freedom 500 on 92 integra
Date Posted: October 11, 2003 at 3:00 PM
This thing sucks! After I hooked it up I pilugged everything in and it went off so I used the remote to turn it off and now the thing dosen't even work. There is no noise from the siren or light form indicator. Did I do something wrong or dose this thing really suck that bad. Any help would be great
-------------
See you later space cowboy
Replies:
Posted By: Chris Luongo
Date Posted: October 11, 2003 at 3:16 PM
You'll need to provide a little more information so we can help. What is a Freedom 500?
The first step, though, would be to go back and carefully test everything.
Just get the unit's brain out, and touch your meter or test light's probe right to the terminals on your alarm.........just take the time and test every single wire that you have connected....it is likely that one of them has a problem. Is there really power on the power wire? Does the ignition wire really test as ignition? And so on....just go through them all until you find an error.
Also, if you did make a mistake, and especially if the unit isn't operating anymore, it is likely that a fuse has blown.
Posted By: Cowboy Bebop
Date Posted: October 11, 2003 at 3:20 PM
The Freedom 500 is a car alarm made by Omega. I checked the fuses and the shock sensor has power I will go check the wires with a meter now. Thank you. ------------- See you later space cowboy
Posted By: Cowboy Bebop
Date Posted: October 11, 2003 at 4:51 PM
checked' um everything seems OK must be broke there goes $50.00
-------------
See you later space cowboy
Posted By: Cowboy Bebop
Date Posted: October 11, 2003 at 11:39 PM
I just installed an alarm on a 92 integra. When I arm it the tail lights, gauge cluster light up, but not the head lights and they also don't work when I thurn them on from the knob. Any suggestion with whats going on.
-------------
See you later space cowboy
Posted By: rudbwoy69camaro
Date Posted: October 12, 2003 at 4:31 AM
Did you check the wiring? (I have a '91 Integra)Upon arming, the parking lights should flash-so when you turn on the "parking lights" @ the switch/knob, it'll turn on the gauge cluster, tail lights and parking lights up front. It shouldn't "flash" the headlights, unless it was wired too...
-------------
Posted By: Cowboy Bebop
Date Posted: October 12, 2003 at 11:03 AM
Right. My question is that the parking light up front doesn't work when I arm the alarm where its supposed to flash and don't turn on @ the knob. The guage and tail light do just not up front.
-------------
See you later space cowboy
|