Clifford RSIII
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=20354
Printed Date: July 05, 2025 at 11:10 AM
Topic: Clifford RSIII
Posted By: vaderfop
Subject: Clifford RSIII
Date Posted: October 20, 2003 at 6:49 PM
I have a Clifford RSIII installed on my 98 Oldsmobile Intrigue, it has been there for about 8 months now. About a week ago it started having transmitter problems (I think). I was no longer getting the signal back from the alarm telling the transmitter if had armed/disarmed/started/etc. Then two days ago the transmitter either stoped transmitting or the alarm stoped recieving the signals. I have tried to reprogram the transmitter to the alarm brain with out success. I also tried resetting the alarm brain by unpluging its main harness for about two hours then plugging it back in, this also did not work.
Does anyone have any ideas on what else i could do.
Replies:
Posted By: JWorm
Date Posted: October 20, 2003 at 7:04 PM
Get a new remote. They fail all the time. This time get one of the newer versions - part # 479C. They are more reliable.
|