2 step unlock help
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=20399
Printed Date: May 15, 2024 at 6:22 AM
Topic: 2 step unlock help
Posted By: mcclintosh
Subject: 2 step unlock help
Date Posted: October 21, 2003 at 5:09 PM
I am installing a commando ez-2500 remote start/keyless entry in a 93 honda accord sedan w/ negative door locks.
the system is successfully installed and working except the 2 step door unlock would be nice. as of now all doors unlock with the transmitter. the commando system has a wire available for 2 steps unlock output, i just have no idea where to connect it, does it connect to the same unlock wire I have already connected to?
Replies:
Posted By: Velocity Motors
Date Posted: October 21, 2003 at 5:49 PM
The first stage unlock is supposed to hook up to a vehicle with the option as standard equipment, but if you want to use it on the Accrod, you haev to hook up the first stage unlock (-) trigger to a relay that will hoo up to the door lock motor wires of the driver's side door. The rest of the doors will be hooked up like normal.
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: SnomanF150
Date Posted: October 21, 2003 at 7:20 PM
In the honda you will have to go into the drivers door and catch the wires going to the actuator and do a reverse polarity on the unlock wire.. like you would do on a ford, but just cut the unlock to throw 12+ to the unlock wire motor side and the other will rest at ground.. to trigger this you will use the unlock all doors wire as this one is the primary unlock wire (the first pulse) and then use the 2nd unlock pulse on the normal ground wire to unlock the rest..
George
David's Car Stereo
Baton Rouge, Louisiana
|