Print Page | Close Window

Please help

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=20500
Printed Date: May 15, 2025 at 8:34 AM


Topic: Please help

Posted By: DonGateteMexico
Subject: Please help
Date Posted: October 23, 2003 at 9:50 PM

i was trying everyway that i know but i cant well here is

i want to turn my radio when i shut off my alarm and tun of the radio when it goes on i need a diagram of the relay somebody help please

see ya felas



-------------
Thanks



Replies:

Posted By: daniel2002p
Date Posted: October 24, 2003 at 6:57 AM
DonGateteMexico wrote:

i was trying everyway that i know but i cant well here is

i want to turn my radio when i shut off my alarm and tun of the radio when it goes on i need a diagram of the relay somebody help please


Ok now so you want the radio to turn on when the alarm goes off and turn it off when the alarm goes on.  Is that what I am understanding???



-------------
2005 Toyota Corolla S
    1.8L VVT-i I-4
Always double check your wires with a DMM!!!
Do Not Use A Test Light!!!
MECP Certified Installer!
Best Buy 665 - IN IT TO WIN IT! TEAM MOBLE!




Posted By: DonGateteMexico
Date Posted: October 24, 2003 at 2:23 PM
yes that's the way i want it

-------------
Thanks




Posted By: daniel2002p
Date Posted: October 24, 2003 at 3:41 PM

Does your alarm have a ground when armed output????  If it does here is what I would do.  I would go out and buy a relay and hook it up the following way:

Connection 86 - Hook up to constant 12v fused at 20A    >>>>>>>>>>>>>>Hook both of these

Connection 85 - Hook up to ground when armed output on alarm                          wire to a high current

Connection 30 - Hook up to constant 12v fused at 20A  >>>>>>>>>>>>>>>12v wire and fuse it!!!!!

Connection 87 - Not used

Connection 87a - Hook up to the remote turn-on wire behind the radio

This was when the alarm is armed the relay will turn the raido off and when disarmed it will turn it on.  Hope this helps.  Also remember, if you ever leave your car unarmed the radio will stay on.  You might think about putting a toggle switch somehwere so that you still have control of it.  You can interrupt Connection 85 or 86 and putting a toggle switch in series so that way you can prevent the relay from turning on when you don't want it to.



-------------
2005 Toyota Corolla S
    1.8L VVT-i I-4
Always double check your wires with a DMM!!!
Do Not Use A Test Light!!!
MECP Certified Installer!
Best Buy 665 - IN IT TO WIN IT! TEAM MOBLE!




Posted By: DonGateteMexico
Date Posted: October 25, 2003 at 12:09 AM

thanks daniel i only have a doubt  85 it is wired with the negative pulse of the start kill of the alarm?

my alarm it's  prestige aps25kb  thanx man



-------------
Thanks




Posted By: daniel2002p
Date Posted: October 25, 2003 at 8:13 AM
Yup, I looked at the manual for this alarm and yes the connections stated abve are correct.  Use your orange wire on your larm and hook it up to the Connection 85 on your relay.  By the way this wire is a constant ground when armed and neutral when disarmed and there are no pulses on that wire.  Hope this helps.

-------------
2005 Toyota Corolla S
    1.8L VVT-i I-4
Always double check your wires with a DMM!!!
Do Not Use A Test Light!!!
MECP Certified Installer!
Best Buy 665 - IN IT TO WIN IT! TEAM MOBLE!




Posted By: DonGateteMexico
Date Posted: October 25, 2003 at 9:14 AM
 thanks man i'll try

-------------
Thanks





Print Page | Close Window