I have installed the Hornet 554T alarm and remote start on my car for awhile. When I remote start it cranks the starter, but fuel pump and accessories do not rurn on. therefore the car won't start it just cranks. Can anyone show me the correct wiring? I got the alarm off of asianwolf website. The relay comes in a bundle. I have all the alarm component wired up right. I have doubts about the remote start. Can you provide me with some detail
The 554 is a great unit and you just may have somthing that needs to be programmed. First, did you wire it tachless? If so you will need to adjust the crank time to fit your needs. Second, if you went with a tach wire, you need to program it in the unit so it knows what to look for. If you say that everything is hooked up right, then it's just a programming issue that's holding you back. Here's the diagrm for your car in the meantime. Hope this helps.
| ITEM | WIRE COLOR |POL| WIRE LOCATION |
| 12V|WHITE/ black |+ |ign harness, f/b plug |
| STARTER|BLACK/ white |+ |ign harness, f/b plug |
| IGNITION|BLACK / YELLOW |+ |ign harness, f/b plug |
| SECOND IGNITION| | | |
| ACCESSORY|yellow |+ |ign harness, f/b plug |
| SECOND ACCESSORY|blue/white |+ |ign harness, f/b plug |
| POWER UNLOCK| | | |
| PARKING LIGHTS +|RED / green | |switch harness, f/box |
| PARKING LIGHTS -| | | |
| HEADLIGHTS|RED / blue *3 |+ |sw harness, f/b plug |
| DOOR TRIGGER|GREEN/ red |- |either running brd *2 |
| TRUNK/HATCH PIN|GREEN/ black |- |at light or indctr *2 |
| HOOD PIN| | | |
|TRNK/HTCH RELEASE| | | |
| FCTRY ALARM ARM| | | |
|FCTRY ALRM DISARM| | | |
| TACHOMETER|blue | |2-pin at dist, tach *1 |
| BRAKE WIRE|GREEN / WHITE |+ |brake pedal switch |
| HORN TRIGGER|blue/red *4 |- |steering column |
| WIPERS| | | |
| LF WINDOW UP/DN| | | |
| RF WINDOW UP/DN| | | |
| LR WINDOW UP/DN| | | |
| RR WINDOW UP/DN| | | |
Notes:
*1 Pin A11 behind gauges *2 Harness running down and forward from dash indicator has door and hatch triggers. *3 Low beam only. High-current (+) *4 High-current ground. Use a relay when interfacing with this circuit.