Print Page | Close Window

97Ford Aspire Tach

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=20531
Printed Date: May 10, 2024 at 2:01 AM


Topic: 97Ford Aspire Tach

Posted By: ajg_two
Subject: 97Ford Aspire Tach
Date Posted: October 24, 2003 at 9:19 PM

Can anyone tell me where to conect the tach wire for a 97 Ford Aspire. I have a Prestige platnum Model APS 685 R/S I am trying to hook up and every time I put it in diagnostic mode it tells low or no tach. But when I do the steps for the tach it tells me it has the tach.  Could I have conected the tach wire to the wrong spot.

ALL help is great

AJG




Replies:

Posted By: NSGrimace
Date Posted: October 24, 2003 at 9:23 PM
You should be looking for a white wire at the distributor or the diagnostic plug next to the battery
Make sure that when you test the wire it ranges with rpm increase.

-------------



Posted By: ajg_two
Date Posted: October 25, 2003 at 5:19 PM

got it on the white 1 and no change.

how do you test the wire.




Posted By: Velocity Motors
Date Posted: October 26, 2003 at 9:01 AM
Go straight to the injector if the WHITE wire does not work. Relearn the tach signal and make sure that the car is at it's lowest idle RPM before attempting to learn the tach signal. Use any wire that is uncommon in color between the injectors.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA


Print Page | Close Window