Remote Window Control?

i just got this the other day. i'm trying to hook it up to a viper 550ESP on a 2000 civic

the guy i got it from says it can do either 4 windows down or 2 up and 2 down. can someone help me figure this out. i know whch wires on the car to hook up for the switch/motors. but there are 3 extra wires on the window box i'm not sure of. 1 is ACC, + trigger and - trigger. when i hook the ACC wire up nothing works at all, and the + trigger does nothing.

The ACC wire hooked up the an ignition wire so that when the car has a key in the cylinder and turned over, the window modules will not work. The + trigger is for alarm systems that output a + trigger from it's AUX channel on the alarm and the (-) is for (-) output AUX channels.

thats what i figured, the instruction that it comes with really suck

so i'm guessing that it's going to make it go up and down  would use the - trigger for up and the + trigger for down?

Yup, just attach the 2 wires on each window to the appropriate trigger wire from the remote control and your set.

is it going to be possible to make them go up and down?

cause if i hook a negative trigger or a positive trigger wouldn't it just set the relay inside the box off and send power to all 4 wires?

if that the case how do i make it so the wires for the front windows make it go down and the wires for the rear windows make it go up?

I need the wiring diagram for the device. Please email it to me at velocity@valleycable.com.

Thanks