Print Page | Close Window

Starter Kill Relay

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=20679
Printed Date: July 16, 2025 at 7:05 AM


Topic: Starter Kill Relay

Posted By: Heckish
Subject: Starter Kill Relay
Date Posted: October 28, 2003 at 1:06 PM

I have a viper system in my 1998 mustang (viper 500+).  Recently when we changed the battery the alarm went nuts.  Just opening hte door would set it off.  Finally a guy from goodyear came out and bypassed it somehow.  A week later the car failed to start, the viper had armed itself somehow.  It just wouldnt let me start the car.  I pushed the valet override button whiel the key was in 'on' position and tried to crank it - nothing happened.  I eventually had to pop the clutch to get home.  I called a viper certified center and they said its probably a starter kill relay problem.  I found hte relay, its a rectangular black box with about 6 or 7 pins.  Can anyone tell me how to wire this so i can start the car?  Any ideas? thanks alot!



Replies:

Posted By: Leshka
Date Posted: October 29, 2003 at 3:45 AM
its simple find the
STARTER  WIREWHITE/ PINKIN IGNITION HARNESS
This wire is cut in half you just have to connect it together and it will work like a brand new....

-------------
LESHKA


Print Page | Close Window